PiTFT 2.8″ Touchscreen for the Raspberry Pi.
- Adafruit Part Number: 1601.
- Stock Type: Raspberry Pi >> Essentials.
- In Stock and Ready to Ship.
- Is this not the cutest little show for the Raspberry Pi? It includes a 2.8″ show with 320×240 16-bit shading pixels and a resistive touch overlay. The plate utilizes the rapid SPI interface on the Pi and can utilize the scaled down show as a comfort, X window port, showing pictures or video and so on. Best of all it connects ideal to finish everything!
- It’s intended to fit pleasantly onto the Pi 1 Model An or B yet in addition works OK with the Pi Zero, Pi 3, Pi 2 or Pi 1 Model A+ or B+ (any Pi with a 2×20 connector) as long as you wouldn’t fret the PCB overhangs the USB ports by 5mm, see the photographs above. On the off chance that you have an advanced Pi with a 2×20 connector, you might need to snatch a PiTFT 2.8″ Plus which does not overhang.
- Utilizations the equipment SPI pins (SCK, MOSI, MISO, CE0, CE1) and also GPIO #25 and #24. All other GPIO are unused. Since we had a minor piece of room, there’s 4 spots for discretionary thin material changes wired to four GPIOs, that you can utilize on the off chance that you need to make a fundamental UI. For instance, you can utilize one as a power on/off catch. See underneath for the connection to get the discretionary civility switches, they’re excluded.
Reviews
There are no reviews yet.